Exclusive: Examine the Motorola ThinkPhone 2025 design in greater detail

 

We exclusively unveiled the Motorola ThinkPhone 2025's design a week ago. Now that we're back, you can see the Motorola ThinkPhone 2025 design up close thanks to some more pictures.

Now that the Motorola ThinkPhone 2025 is on the horizon, you may examine its design in further detail.



Five pictures of the phone may be seen if you look inside the gallery beneath the article. The model in black is displayed here, and it might be the sole variation. Last year, the initial Motorola ThinkPhone was like that.





That model was known as "Carbon Black," and judging by its backplate, this one might share that designation. Here, the back side is covered in carbon fiber. This applies to both the camera island and the backplate.



As you can see, the device itself has a flat display with a camera hole in the middle of it. Although it appears that the bottom bezel is somewhat thicker than the others, the difference is hardly perceptible.

The smartphone will have three cameras on its back.



On the right side are all of the physical buttons, and on the rear are three cameras. The camera island is situated in the upper-left corner and does protrude somewhat on the back. It also houses the LED flash of the phone. The "ThinkPhone by Motorola" branding is seen in the lower-right corner.



In addition to being flat on all sides, this smartphone will include a metal frame. For comfort, it will also slant slightly toward the edges. Slowly, the backplate will bend toward the edges.



The gadget will have an LTPO panel and a 6.36-inch pOLED display. It will have a resolution of 2670 x 1200 and a refresh rate of up to 120 Hz. The MediaTek Dimensity 7300 SoC will power the phone, and a 4,310mAh battery is on the way.

There will be 8GB of RAM and capability for 68W wired charging.



In addition, the device will have 256GB of storage and 8GB of LPDDR4X RAM. In addition to supporting 68W charging, the bundle will come with Motorola's 68W TurboPower Charger.



A 10-megapixel telephoto camera with three optical zooms and a 13-megapixel ultrawide unit will support a 50-megapixel primary camera. The gadget will be IP68 rated for resistance to dust and water and will make use of Gorilla Glass 7i protection. Additionally, the kit will have MIL-STD-810H certification.



The phone should weigh 171 grams and have dimensions of 154.1 x 71.2 x 8.1 mm. Last January, the first Motorola ThinkPhone was released. Therefore, the one-year mark has long since passed. The ThinkPhone 2025's precise release date is yet unknown. Keep an eye out. (*)

Location:

Share :